The GT24-B5377 is configured to supply Two nodes in 1U, deliver Higher Power Efficiency and significantly reduces IT space rental costs. The 1U Duplex reduces cost by providing higher power efficiency. The placement of two nodes in 1U also reduces your chassis, power supply, and rack cost.

Using LGA771 Xeon LV CPU (40W for DC & 50W for QC) offer same computing power with almost half of LGA775 CPU power consumption. Energy saving, and low down TCO. 8 DIMM per node up to 32 GB memory is an advantage vs. LGA775 platform 8GB memory capacity limitation. Each node supports one PCI-E x 16 expansion slot and has a SO-DIMM connector as an option for an IPMI 2.0 w/KVM over IP. Each node can support up to two sata/sata2 disks with raid 0,1 configuration.



The solution is ideal for Web hosting; Data center/data farm; HPC computing cluster; search engine nodes; and high-availability applications.

Enclosure
Industry 19” rack-mountable 1U chassis
Dimension: D 25.4 x W 17.2 x H 1.72 inch (645x436x43.6mm)
Two nodes in one chassis

Processors(Per node)
One LGA771 socket
Supports Intel 5100/5200/5400 processors
Supports 1.33/ 1.06GHz FSB

Chipset(Per node)
Intel 5100 (San Clemente) North Bridge
Intel ICH9-R South Bridge
Winbond W83627DHG Super I/O

Memory(Per node)
Supports eight (8) DDR2- DIMMs
DDR2-533/667 memory
Support 256Mb, 512Mb, 1Gb, 2Gb, 4Gb Registered ECC DIMMs, Max 32G

Expansion Slots(Per node)
One (1) x16 PCI-E with riser (pre-installed)
One SO-DIMM connector for IPMI 2.0 W/ KVM over IP (Optional)

Back I/O Ports(Per node)
One stacked dual USB ports with One RJ45 port (supports M3295-2/M3296 IPMI from LAN)
One stacked up LAN ports with dual RJ45 connectors
One 9-pin COM port
One 15-pin VGA port

Front Panel Features(Per node)

I/O
(2) USB 2.0 ports
(1) eSATA port(Optional)

LED indicators
Power LED
(2) LAN LEDs
ID LED
HDD active LED
Warning LED

Switches
Power
Reset
NMI
ID

Storage(Per node)
Hard Disk Drives:
Serial ATA II Host controllers embedded
Support (2) SATA/SATA2 HDD with RAID 0,1

Networking(Per node)
Tow LAN ports
Dual Gigabit ports from Intel 82571EB

Video(Per node)
XGI Z9S, PCI graphics controller
32MB DDR2 frame buffer of video memory

Drive Bay (Per node)
Support (2) 3.5" SATA Hot-swap drive bays

Motherboard
(2) TYAN S5377 customized 5.9”x13” board

BIOS
AMI BIOS on 8Mbit Flash ROM
Supports ACPI 2.0
Supports boot from USB device
WOL and PXE support
Power-on mode control for AC power loss recovery
PnP, DMI2.0, WfM2.0 Power management (S1,S4,S5 support)
Serial Console Redirect

Server Management
System fan speed monitoring and control
Support Tyan Server Management(TSM)
Optional TYAN M3295-2/M3296 SMDC, IPMI 2.0 compliant

System Cooling
(2) 40*40*56mm 15000rpm heavy-duty fans with fan speed monitor/control
(6) 40*40*28mm 15000rpm heavy-duty fans with fan speed monitor/control
(2) Passive CPU heatsinks

Power Supply
High efficiency EPS 12V, 1U, 600W with PFC (Note: put on the middle of the chassis)
100V~240V AC input

Regulatory
FCC Class A (Declaration of Conformity)
CE (Declaration of Conformity)
VCCI
C-Tick

Environment Temperature
Operating temperature 5°C ~ 35°C
Non-operating temperature -40°C ~ 70