Click here for the selection of operating systems we can pre-install on your machines.

Tyan 1U - Tank GT14 (B5372-LC)

Tyan’s latest 1U solution, the Tank GT14 B5372-LC, is packed with many excellent features and capabilities to comply with various applications and objectives. Utilizing the Tyan Tempest i5000VS (S5372-LC) platform, it supports two quad-core or dual-core processors (Intel Xeon processor 5100/5100LV/5300 (80W) series) and six FBDIMM slots, up to 24GB fully buffered DDR2-553/667 of memory capacity. The Tank GT14 B5372-LC also features an optional PCI-E or PCI-X expansion slot, a Tyan LCM module and a Remote System Management IPMI 2.0 capabilities. It also has an additional Tyan Taro card equipped on the SO-DIMM slot and (2) SATA/SATA2 2.5” HDD with RAID 0/1 support.


Tank GT14 (B5372-LC)














Motherboard

Motherboard
• TYAN Tempest i5000VS (S5372-LC)
• SSI CEB v1.01 footprint (12" x 10.5")

Processor
• Dual LGA771 sockets
• Supports up to two Intelฎ Xeonฎ 5100 / 5100LV / 5300 (80W) / 5300LV sercies processors
• 1333/1066MHz FSB

Chipset
• Intelฎ 5000V (Blackford-VS) MCH
• Intelฎ ESB2 I/O control hub
• SMSC SCH5017 Super I/O chip
• SMSC EMC6D103 H/W monitoring IC

System Memory
• Dual channel memory bus
• Up to six (6) Fully-Buffered DIMMs
• Supports max. of 24GB DDR2 667/533 memory

Expansion Slots
• Alligned (1) 64/133 PCI-X slot & (1) PCI-E x8 slot, supporting PCI-E (x16 slot, M2082-2) riser card
• 133MHz PCI-X (M2055) riser card (option)
• (1) full height/full length add-on card supported

Integrated Video
• XGI Volari Z7 (XG20) PCI graphics controller
• 16MB DDR frame buffer of video memory

Server Management
• System fan speed monitoring and control
• Support Tyan Server Management(TSM)
• TYAN M3291 SMDC Kit (optional), IPMI 2.0 compliant
• Support TYAN LCM Module

Integrated LAN Controller
• (2) LAN ports: Dual Gigabit ports (ESB2 embedded) with i82563EB dual-PHY

BIOS
• Phoenix BIOSฎ on 8Mbit Flash ROM
• Supports APM 1.2 and ACPI 1.0
• Serial Console Redirect
• USB boot supported
• PnP, DMI2.0, WfM2.0 Power Management
Chassis

Enclosure
• Industry 19" rack-mountable 1U chassis
• Dimension:
With Bezel - 15.5" (D) x 17.2" (W) x 1.7" (H) 394 (D) x 436 (W) x 43.8 (H) [mm]
W/O Bezel - 14.4" (D) x 17.2" (W) x 1.7" (H) 365 (D) x 436 (W) x 43.8 (H) [mm]

Power Supply
• EPS 12V, 1U, 400W high efficiency w/ PFC
• 100V ~ 240V AC input

Back I/O Ports
• PS/2 Mouse and Keyboard ports (stacked)
• (2) USB 2.0 ports (stacked)
• (1) 9-pin COM port
• (1) 15-pin VGA port
• (2) RJ45 10/100/1000 Base-T ports

Front Panel Features
• I/O: (2) USB 2.0 ports
• LED indicators: HDD Active, power, (2) LAN, ID, & warning LEDs
• Switch: power, ID
• LCM module

Integrated Storage Controller
• ESB2: Single channel master mode
supports (2) IDE devices;
supports (4) ports running at 3.0Gb/s

Storage Drives
• Hard Disk Drives:
Support (2) SATA/SATA2 2.5" HDD w/ RAID 1,0

System Cooling
• (4) 40 x 40 x 28 mm 15000rpm heavy-duty fans with fan speed monitor/control
• (2) Passive CPU heatsinks

Environment Temperature
• Operating temperature 5ฐC ~ 35ฐC
• Non-operating temperature -40ฐC ~ 70ฐC

Regulatory
• FCC Class A (Declaration of Conformity)
• CE (Declaration of Conformity)
• VCCI
• C-Tick

Bespoke Website Design by SSF Design Sentral - Registered in England & Wales: Co. Reg. 6465078